PROTECTION

Zinc Coating
Zinc is incorporated between the bare steel substrates (both side) and the outer coating for corrosion resistance. Galvanization weight is confirming to BS EN 10147 with an average weight of 275 gm/m2 (20 microns). The combination of zinc and external coating adopted provides exceptional level of products performance and resistance to corrosion. Cuts and exposed edges are protected by electrolytic action as Zinc "drags over" covering sheared and punched area.

Aluminium Alloys
Aluminium Alloys are per-treated by hot sulphuric acid alternating Anodizing, Giving an excellent protection cover of Aluminium oxide. Natural oxidation can protect all cuts and exposed area.

Coating Primer
It is a specially formulated flexible light gray backing cover with nominal thickness of 5 microns. The reverse side of the profile is normally coated with primer to provide adequate protection in dry internal environments.

Polyster
Polyster is a 25 microns coating combining economy with excellent flexibility and temperature stability. Under normal environment condition, polyster coating is a durable protection cover. With appropriates attention sheet lifetime may increase considerably.

PVF2
Ployvinylidene Fluoride is 27 microns thick coating. It is suitable for worldwide roofing and cladding applications. PVF2 is an inert fluorine modified system based on Kymer 500 resin. The coating is resistance to solvent attack and has continuous heat resistance (120⁰C). Color retention is improved in all climatic conditions. PVF2 has excellence life expectancy on the weather side subjected to appropriate maintenance.

Plastisol
Plastisol is a 200 microns (0.2mm) thick polyvinyl coating (PVC). this coating exhibits an embossed leather grain finish. It is tough; withstand rough treatment in the workshop, during transit, and on site. It is scratch resistance, has good color stability. Plastisol is suitable for cold stores due to its excellent resistance to corrosion, temperature, and cleaning process.

ARS
Other finishes, such as ARS (Abrasive Resistance Surface) are also available. This type is used for cladding, guttering and general engineering purposes. It has good stain and dirt resistance, excellent mark resistance and color retention properties.

Colours
MEI can provide range of color with reasonable period of time. A stock of "fast moving" color is usually available. Color samples presented blow are for illustration only. These colours are not actuals but are approximations and will vary according to you monitor's settings.